Filter
Top Products
www.urcsupport.com
17
NOTE: If you are programming a channel for a Digital
Cable Converter, you need to enter all
channels in a 3-digit channel format. For
example, to program channel is 39, enter
039.
6. To add another channel, repeat steps 1
through 5, substituting the new channel to be
added in step 4.
NOTE: Programming more than five channels on the
VOD key overwrites previous settings.
Clearing the VOD Key
The VOD key is now clear and ready for reprogramming
(see “Programming the VOD Key.” on page 16).
4. Press CBL once, followed by the channel
number to be programmed (e.g., 3 9 for
channel 39).
5. Press and hold SETUP until the CBL key blinks
twice.
1. On the remote control, press CBL once; it
blinks once. Then press and hold SETUP until
the CBL key blinks twice.
2. Enter 9 9 5. The CBL key blinks twice.
3. Press VOD once.
4. Press and hold SETUP until the CBL key blinks
twice.