Universal Electronics Polaris Universal Remote User Manual


 
www.urcsupport.com
9
Key Charts
Key Function
Use SETUP for all programming
sequences.
Quickly press SETUP twice to enable
backlighting of all the keys on your
Polaris Remote Control. After
backlighting has been enabled, quickly
press SETUP twice to disable
backlighting.
To turn on your television or cable box,
press TV or CBL once.
Each device key has an embedded LED
(red light) that blinks upon selection
and indicates the remote control is
working and (after programming) is
sending signals. When backlighting is
enabled, all the keys on your remote
control are lit when you press any key.
Use GUIDE to display the program
guide.
Press MENU once to display available
interactive services.
Use INFO to display the current channel
and program information.
Use DAY+ (or DAY-) to move a day
forward (or back) on your cable
converter’s program guide.
Use the Cursor keys to move the cursor
in the program guide and menu screens
and to navigate within the interactive
service.
Use OK/SELECT to choose options, PPV
events, and to tune programs from the
program guide.
Use PAGE+ (or PAGE-) to page up (or
page down) through menu screens and
the program guide.
Use EXIT to exit out of your cable
converters menu and guide.