Universal Electronics URC-3021 Universal Remote User Manual


 
8
PROGRAMMING DEVICE CONTROL
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player,and a Motorola
cable box.To control devices other than the default brands,perform the fol-
lowing steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and,if
applicable, insert media (e.g.,cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e.,DVD/VCR,
CBL/SAT,or TV).
NOTE: To program control of a VCR,PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After program-
ming a VCR Combo device,you will be able to control channel selec-
tion, volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo,or TV/DVD Player Combo, press DVD/VCRonce.After pro-
gramming a DVD Combo device,you will be able to control channel
selection,volume,and DVD functions.
NOTE: To program control of a Cable Box,Cable Box/PVR (or DVR)
Combo,Satellite Receiver,or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SATonce.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the
Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device.If performed cor-
rectly,the
LED will blink twice.
NOTE: Ifthe LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off.If it does not,repeat
steps 2 through 5,trying each code for your brand until
you find one that works.If it still doesn’t work,try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to con-
trol.For future reference,write down each working device
code in the following boxes:
DVD/VCR Code:
Device Type:__________________
CBL/SAT Code:
Device Type:__________________
TV Code:
Device Type:__________________
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 8