Filter
Top Products
8
Blink out the Current Code
If you have set up your TOTAL CONTROL via the Search Method,
you can blink back your code for future reference.
Example: To blink out your television code:
1 Press the TV key on your TOTAL CONTROL.
2 Aim the TOTAL CONTROL at your Television. Press and
hold down the SET key until the red light blinks twice.
3 Press 9 9 0, the red light will blink twice.
4 For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the digit is "0".
5 For the second digit, press 2 and count all the red blinks.
6 For the third digit, press 3 and count all the red blinks.
7 For the fourth digit, press 4 and count all the red blinks.
- To blink back the code for your other devices follow the instructions
above, only press the appropriate device key during step 1.
Quick Code Reference
Write down the codes for your devices in the boxes below and in the
battery compartment for quick and easy reference.
Device type Code
1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■■ ■■ ■■ ■■
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■■ ■■ ■■ ■■
3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■■ ■■ ■■ ■■
1
2
3
4
TV
SET
P
9 9
0