Filter
Top Products
Page 13
STEP 7: Once you’ve entered a correct
code,
you must save it.
Press the com-
ponent button you just programmed (in this
case TV) one more time to save the code
number.
The component LED light will blink three
times to confirm that the code was success-
fully stored. Now when you press the TV
component button, all of the buttons will
work with your TV.
Program the remaining components by
repeating steps 3 through 7.
IMPORTANT: If you have tried all the set-
up codes in the list and the component still
did not turn off after Step 5, either the Auto-
Search Method (page 14) or the Learning
Method (page 16) will help you program.