Auto Search Method
Please use this method if none of the Set-Up Code numbers
worked for your device during the standard set-up proce-
dure or if the manufacturer or brand for your device is not
listed in Set-Up Code Tables.
1 Turn on the device you would like the remote control to
operate, either manually or with your original remote
control.
2 Press the corresponding Device Button (TV, VCR, SAT,
CBL, AUD, CD, DVD, or AUX) and the MUTE button,
simultaneously. SET will appear in the LCD.
Note: SET appears in the LCD for 20 seconds to indicate that
the remote control is ready to be programmed. The following
steps must be entered while SET appears in the LCD.
3 Point the remote control toward the device and press the
CHANNEL UP button on the remote control. Each but-
ton press sends the signal for one Set-Up Code number.
Keeping the CHANNEL UP button pressed produces a
quick scanning of the Set-Up Code numbers.
Release the CHANNEL UP button as soon as the device
turns off. Please confirm that you have the correct code
by pressing the MUTE button on the remote. You should
be able to turn your device on and off with this button.
10
10
