Filter
Top Products
19
URC-100
Overview of Erasing
You can erase an individual button with a learned
command, a macro or a favorite channel. You can
erase an entire Device’s learned command or macro
buttons. You can also erase ALL your learned
commands on all devices or all your macros or favorite
channels everywhere.
If you really want a fresh start, it is possible to reset
everything to the factory default condition.
Erasing One Learned Command
Press and hold both the device button where the
command is stored and the SELECT button for three
seconds.
Note: You have 30 seconds for each step, otherwise the
Unifier will time out automatically.
The Unifier display changes to:
Press and hold the button you’d like to erase for two
seconds. The display will flash ERASE, CLEAR, then
return to LEARN.
Press the LIGHT button to save.
SELECT
Button
Device
Buttons
LEARN
1
2
3