Filter
Top Products
28 EtherneTV Media Distribution System
T To install STB software and/or the download application:
1. Double-click on
Setup_STB_x_x_x.exe in the installer folder to launch the installer.
Then click
Next to continue.
2. Select the features you want to install: the
Download Application, the Release Package,
or both. Then click
Next. (If you select only the Download Application, you will not be
prompted to create an FTP user account as explained below.)
3. Select an installation folder for the
Download Application and click Next. The default is
C:\Program Files\VBrick\.
4. In this scenario, the installer has detected an FTP server and will create a user account.
STBUser is the default name and password for the FTP account. (If you change the
default user or password, you will have to enter them manually each time you run a
download.) Press
Next, confirm, and press Next again (or Skip this step entirely if you do
not want to create an FTP account at this time). Note that if an FTP server is not
currently installed on the server machine, you may be prompted for the installation disk.