Filter
Top Products
E - 8
CONNECTIONS
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
CONNECTING AN A/V DEVICE
To connect other equipment such as a VCR, camcorder, satellite system or cable, etc.:
Connecting a VCR /
Camcorder / Satellite
System / Cable
Connect the AUDIO and S-VIDEO
cable (not included) as shown.
Make sure you connect the cable
from the other equipment (AUDIO
OUT and S-VIDEO OUT) to this
unit (AUDIO IN and S-VIDEO IN).
NOTE:
Please refer to the user manual
for the other equipment for more
information.
Connecting a Digital
Antenna
The tuner in this TV receives ATSC
TV signals from an antenna.
This digital TV can receive standard
(SDTV) and high definition (HDTV)
over the air broadcasts.
Connecting an Analog
Antenna or Device
The tuner in this TV receives NTSC
TV signals, analog cable signals or
the RF output from a satellite
receiver, VCR or cable box.
Satellite, cable or TV
antenna cable to TV
ANTENNA terminal
(cable not included)
To S-VIDEO OUT /
AUDIO OUT jacks
To S-VIDEO
IN jack
To AUDIO
IN jacks
(AV IN)
PLV16198S2_01-11.pmd 9/7/2007, 12:30 PM8