Filter
Top Products
Serial Communications
Vidikron VL-26/VL-32 Owner’s Operating Manual 49
The following serial commands are meant to emulate buttons on the remote control. Each button
has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing
so via serial commands. These commands provide active OSD responses just like the IR remote.
Each command begins with [key followed by the four-digit number of the button. No carriage
return is necessary. The response you receive from the unit if the command is valid will be a
right-bracket (
]) followed by the four-digit numeric code you sent. (For example, the ‘ON’ command
is [key0015; the response will be ]0015). All commands are in ASCII.
[ key 0002
OFF
0015
ON
[ key 0004
Number 1
0005
Number 2
0006
Number 3
0008
Number 4
0009
Number 5
0010
Number 6
0012
Number 7
0013
Number 8
0014
Number 9
0017
Number 0
0035
Number 100
0023
Number “–”
[ key 0001
TIMER OFF
[ key 0105
INPUT1
0027
INPUT2
0028
INPUT3
0102
DVI
0101
RGB HD
0019
TV
[ key 0003
CUSTOM
0062
ISF NIGHT
0031
ISF DAY
[ key 0040
ANAMORPHIC
Table 6-1. Serial Commands (continued)
Command Description