Filter
Top Products
Installation
20 Vidikron PlasmaView Owner’s Operating Manual
PRE
L
IMINAR
Y
ANALOG RGB OUT (INPUT 1) Connection: The PlasmaView has an RGB output for looping
the signal received at INPUT 1 out to a second RGB display device. Connect the second
display device to the ANALOG RGB OUT connector as shown in
Figure 3-4.
Figure 3-4. ANALOG RGB OUT (INPUT 1) Connection
DVI-D (INPUT 2) Connection: The PlasmaView has a DVI-D input for connecting a personal
computer, DVD player, DTV decoder or any other device with a DVI output. Connect such
devices to INPUT 2 as shown in
Figure 3-5. Use a 24-pin, DVI-D (digital only) cable.
Figure 3-5. DVI-D (INPUT 2) Connection
A video signal is not output when the PlasmaView is powered off or in
standby mode.
To external monitor
ANALOG RGB OUT
(D-Sub)
ANALOG RGB IN
(D-Sub)
INPUT1
Note
DIGITAL RGB
(DVI-D)
INPUT2