Filter
Top Products
Controls and Functions
6 Vidikron PlasmaView Owner’s Operating Manual
PRE
L
IMINAR
Y
Connectors Figure 2-2 shows the rear-panel connector locations on the PlasmaView.
Figure 2-2. PlasmaView Rear Panel
1. SLOT 1
Not used.
2. SLOT 2 (DVI-D input)
HDCP-compliant digital video input. Connect the HDMI output from the VHD
Controller to this input. (The audio input is not used. Connect the audio outputs from
your sources to an external audio receiver.)
3. SLOT 3
Not used.
4. PC IN
Not used.
5. RS-232C (9-pin, male D-Sub)
Connect the RS-232 OUT port on the VHD Controller to this input.
➤
SERIALPC IN
AUDIO
SLOT1 SLOT3
P
R
/C
R
/R P
B
/C
B
/B
Y/G
AUDIO
RL
COMPONENT/RGB IN
SLOT2
AUDIO
DVI-D IN
1 2 3 4 5