Filter
Top Products
channels that have been located are stored. If you would like to stop
"Auto Search" during the process, press the function button.
5.
Fine Tuning: NTSC-M is seldom used.
6. AFC can be set to ON or OFF. When it is set to ON, the TV will search
the TV signal automatically; when there is any offset in the signal, it will
automatically adjust the channel to the correct position.
7. Skip can be set to ON or OFF. When it is set to ON, a channel can be
skipped by pressing the switching button on the remote control or on the
front panel.
8.
Reset To Default: Reset to the factory default value.
ViewSonic 18 N2060w