Filter
Top Products
Setup Setting
1. Language: This indicates the different languages available for the OSD menu, including
Chinese, & English. The default is Chinese
2. Wide Mode: To select picture size. Includes 4 modes: Full, 4:3, 16:9, & 16:9 Subtitle. (The
options of aspect ratio may be different according to its input source)
3. Sleep Timer: Use this button to set a time period after which the TV will enter into standby
mode. The time period can be 0>15>30>45>60>90>120 minutes.
The timer will begin to count down from the selected number of minutes after the OSD
menu disappears.
Note: To check the remaining time, press the SLEEP button. To cancel the sleep timing,
press the SLEEP button repeatedly until 0 appears. If you turn off the TV after you set the
sleep timing, the setting will be cleared. You will need to set it again.
4. Start/Off : To setup turn on and turn off time.
5. Freeze: In TV mode, to select channel change pattern is freeze or black screen.
6. Blue Screen: When there is no signal input in TV, AV, S-Video and HDTV modes, the
screen will become blue. If set to On, the screen will become blue. If set to Off, the screen
will display a snowy picture when in TV signal mode and become black in other signal
modes. The default is On.
7. Menu Timeout: OSD stay timer.
8. Menu Blending: Adjust menu transparency within the range from 0 to 6.
9. Reset : Used to resume the TV’s default settings.
ViewSonic N3290w/N4290p/N4790p
17
ENGLISH