Filter
Top Products
3. The range of adjusting Balance is -50~+50; when adjusting from 0 to -50, the sound
from the left track fades until silence; when adjusting from 0 to +50, the sound from
the right track fades until silence.
4. AVL: you can set it “ON” or “OFF”.
The function is to adjust the input sound automatically. You may enable this function
when you notice that the sound in the two tracks are very different, in order to prevent
the bad sound effect resulting from large sound variation.
5. Select "ON" or "OFF" for Loudness: a default setting is preset, you may adjust when
necessary.
The following menu will appear when selecting continuously:
6. Preset: Designed for different types of sound output, where in, the voice music,
personal and theatre modes are preset; you can set Bass, Treble and Equalizer in
sound output mode according to your preference.
7. Equalizer: You can select and adjust 100, 300, 1K, 3K and 8K respectively (the figures
represent the sound frequency range).
8. Reset to default: Reset the sound setting to the factory default value.
Picture setup
When the input source is in TV/AV/S-VIDEO /SCART/ YPbPr/ HDMI, you can select
Brightness, Contrast, Colour, Sharpness, Dyn. Colour Temp, preset and Reset to default
respectively; shown in the figure below:
ViewSonic 17 NX1940w/NX2240w
ENGLISH