Filter
Top Products
ViewSonic 20 NX1940w/NX2240w
3. Programme name：show the programme name, also the user can give the programme
a unique name
4. Colour System / sound system: select the colour and sound system the current
channel.you can selet ”auto”,the set will identify it by oneself
1. Autostore: Select "Autostore" to search all signaled channel; when the searching
is complete, it stays at the first channel with signal and all channels that have been
located are stored. If you would like to stop "Autostore" during the process, simply
by pressing the function button.
5. Frequency：show the current signal Frequency
6. AFC can be set to ON or OFF. When it is set to ON, the TV will search the TV signal
automatically; when there is any offset in the signal, it will automatically adjust the
channel to the correct position.
7. Skip can be set to ON or OFF. When it is set to ON, a channel can be skipped by
pressing the CH button on the remote control or on the front panel.
8. Reset to default: Reset to the factory default value.
ENGLISH
2. Programme no. : Shows the current programme number.