Filter
Top Products
E
N
G
L
I
S
H
TV Channel Menu
ViewSonic N2010 21
TV Channel Menu only works when the input source is TV.
1. Press Enter to get into TV Channel Menu.
2. Use to select the desired items.
3. Press Enter to get in to the items.
Auto Scan: To automatically preset the TV channels into the TV.
1. Function: To look for all the viewable channels in the set area. Kindly suggest
you auto scan all the channels before watching your LCD TV for the first time.
2. After auto scan all the available channels, you need not to do it again when
turning on your TV next time, because it will automatically store them in memory.
3. If you want to stop auto scan, press any key.
System Select: To select the signal input of TV system (B/G/H, D/K, L, L’, I, ALL)
with .
If you select “L,” the auto scan system will only scan the channels of L system.
If selecting “ALL,” it will scan all the available channels, and it takes much
more time to do it.
Channel Skip: To add or erase TV channels.
1. Use to select the desired channel.
2. Then use to keep or skip the channel.
3. Press EXIT to leave the page.
4. To recover the skipped channel, select
Keep function.
Select
Adjust
Channel Skip
CH 0: Keep
TV-Channel
Auto Scan
System Select
Channel Skip
Channel Exchange
Channel Copy
Fine Tune
Manual Store
ALL
Exit
Select
Enter
Adjust