Filter
Top Products
E
N
G
L
I
S
H
BASIC OPERATION
Powering the LCD TV
To operate the function of your LCD TV, you can use your remote control or
those buttons above your LCD TV to set input sources, such as OSD sources,
volume adjusting, and ect.
Before using the LCD TV:
1. Insert the power plug.
2. Connect external equipment properly.
3. Turn on the Main AC Power Switch. (If the LCD TV will not be used for a long
period of time, please turn it off)
Power On/Off
To turn the LCD TV on/off :
Press the POWER button under the LCD TV or press the Power button on your
remote control to turn on/off the TV. The power LED indicator lights up when the
LCD TV is working.
Select input source
To select the required input sources. Use to move your cursor bar, and input
with Enter.(please refer to page 15 )
VOLUME Adjusting
Press or VOL-/+ to adjust the volume.
If you prefer to deaden the volume, press MUTE.
If you want to open the volume, press MUTE again, or press directly to
adjust the sound.
INFO –
To display the information of current source and TV channel.
Press INFO, and the current state will be displayed on the screen.
Channel Select
Press number key, CH-/+ key or button to select your desired channel.
If your desired channel is below 100, directly press number key. If your desired
channel is over 100, press 100+ key first, and then press the other two number
keys.
Ex: Your desired number is 8.
Press 0 press 8 or press 8 only.
Ex: Your desired number is 110.
Press 100 press 1 press 0.
ViewSonic N2750w 17