Filter
Top Products
CLEANING AND MAINTENANCE
Cautions When Using the Plasma Display
Do not bring your hands, face or objects close to the ventilation holes of the plasma dis-
being released through the ventilation holes. Burns or personal injuries may occur if any
body parts are brought too close. Placing any object near the top of the display could also
result in heat related damages to the object as well as the display itself.
Be sure to disconnect all cables before moving the plasma display. Moving the display with its cables
attached may damage the cables and thus case fire or electric shock danger.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of clean-
ing or maintenance procedure.
Front Panel Cleaning Instructions
The front of the display has been specially treated. Wipe the surface gently using only a cleaning cloth or a
soft, lint-free cloth.
If the surface is particular dirty, soak a soft, lint-free cloth in a mild detergent solution. Wring the cloth to
remove excess liquid. Wipe the surface of the display to remove dirt. Then use a dry cloth of the same type
to dry.
Do not scratch or hit the surface of the panel with fingers or hard objects of any kind.
Do not use volatile substances such as insect sprays, solvents and thinners.
Cabinet Cleaning Instructions
If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth.
If the cabinet is extremely dirty, soak a lint-free cloth in a mild detergent solution. Wring
the cloth to remove as much moisture possible. Wipe the cabinet. Use another dry cloth to
wipe over until the surface is dry.
Do not allow any water or detergent to come into contact with the surface of the display. If water or mois-
ture gets inside the unit, operating problems, electrical and shock hazards may result.
Do not scratch or hit the cabinet with fingers or hard objects of any kind.
Do not use volatile substances such as insect sprays, solvents and thinners on the cabinet.
Do not place articles made from rubber or PVC near the cabinet for any extended periods of time.
Avoid Still Images
Do not allow a still picture to be displayed for extended periods of time. This can cause a
permanent image to remain on the plasma display. Examples of still images may include:
still computer images, still video game images, still logos or pictures, text and images dis-
played in 4:3 Normal mode.
Contents of this manual is subject to change without notice.
Trademark Credits
VGA is a trademark of IBM Corporation.
Macintosh is a registered trademark of Apple Computer Corporation.
SVGA is a registered trademark of the Video Electronics Standard Association.
BBE is a registered trademark of BBE Sound Inc.
SRS and symbol are trademarks of SRS Labs Inc.
SRS technology is incorporated under license from SRS Labs, Inc.
All other trademarks are the properties of theri respective owners.
ViewSonic VPW4255 36
play. The top of plasma display is usually very hot due to the high temperature of exhaust air