Filter
Top Products
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
56
PTZ camera configuration
Since VisualServer can be used in either Ethernet network or PPP network, the single serial port can be
used to control either external COM port devices like a PTZ camera or modem. While in PPP interface,
go to Modem page for modem configuration. Options on this page will be ignored.
VisualServer supports RS232 and RS485 interfaces to control external serial port devices. Refer to the
hardware description to connect an RS485 device. The included camera control cable can be used for
Sony or Canon cameras. The choice "Auto Detect Driver" in driver option will let VisualServer detect
the supported camera models sequentially from RS232 to RS485.
Administrators can pull down the list to select UART "Interface Mode" according to the connected
device and select the camera model directly to save time in detection.