Filter
Top Products
VIZIO SV420M & SV470M User Manual
46
www.VIZIO.com
Sleep Timer
Press the " button to highlight the Sleep Timer selection.
Press the # button to select the timer to turn-off the TV in 30, 60, 90 or 120
minutes.
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely.
Wide
The Wide option is the feature which allows you to select how the picture
displays on the screen.
Press the
" button to scroll down to this option and highlight it.
Press either $ or # button to make the correct selection, you will see the
screen adjusting to the different sizes which apply to this feature.
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely.
Input Naming
This feature has been added to facilitate you in identifying or labeling the input
and signal which is being watched. You can use up to 8 characters; either
letters or numbers or combinations of both.
Press
" button to highlight this option.
Press # button to obtain the next screen which shows the different inputs.
Press
" button to select the desired input which you want to label or name
(Examples: VCR, DVD,.., etc.) it with any name which will make easier for you
to recognize it.
Press the MENU key to go to the first space (_) in the bracket.
Press either the
! or " button and select either the letter or number belongs
to this place.
Press the # button to go to the next space (_) and again
Using either the
! or " button select the second character of the name given
to this Input.
Repeat the last previous two steps until the name
of the input is completed.
Press the MENU key to accept the name of the
input or the LAST key to cancel the setting. .
Press the LAST key when you have finished to go
to the previous menu.
Since you are already in this feature; it is
recommendable to name all the Inputs which are
being used as well as these for which you have an
idea what their name is going to be.
Press the LAST key once to return to the previous
screen or repeatedly to return to your program if
task has been completed.