Vizio E390i-B0 TV Antenna User Manual


 
A
60
The TV displays “No Signal.”
Press the INPUT button on the remote control to select a
different input source.
If you are using an antenna or cable TV connected
directly to the TV, scan for channels. See
Scanning for
Channels
on page 36.
There is no power.
Ensure the TV is plugged into a working electrical outlet.
Ensure the power cable is securely attached to the TV.
Press the Power/Standby button on the remote or on
the side of the TV to turn the TV on.
The power is on, but there is no image on the screen.
Ensure all cables are securely attached to the TV.
Ensure all devices are connected correctly. Devices
differ; see your device’s user manual for details.
Adjust Brightness, Contrast, or Backlight. See
Adjusting
the Picture Settings
on page 23.
Press the INPUT button on the remote to select a
different input source.
There is no sound.
Press Volume Up on the remote control.
Press the MUTE button on the remote to ensure mute is
off.
Check the audio settings. See
Adjusting the Audio
Settings
on page 31.
Ensure the speakers are set to On.
Ensure no headphones are connected to the TV.
Check the audio connections of external devices
(Blu-ray player, game console, cable/satellite box) that
are connected to the TV.
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The sound is flat or dialog is not audible.
Turn off Sound Leveling. See
Adjusting the Audio
Settings
on page 31
.
The colors on the TV don’t look right.
Adjust the Color and Tint settings in the Picture menu.
See
Adjusting the Picture Settings
on page 23.
Reset the picture settings. See
2. Use the Left/Right Arrow
buttons on the remote to change whether the TV will
turn off. If you don’t want the TV to turn off when there is
no signal, change the setting to Off. Otherwise, select 10
minutes. on page 33
.
Check all cables to ensure they are securely attached.