Vizio E500AR Universal Remote User Manual


 
HELP TOPICS
How do I return to the
Setup App?
There is a picture, but
there is no sound.
The TV displays
“No Signal.”
There are black/
gray bars on the top/
bottom/sides of the
screen.
There is no power.
Note that some television channels add black bars to the picture.
Set the TV to Wide or Zoom mode. Press MENU, then select Wide. Highlight Wide or
Zoom and press OK.
Adjust the video settings of your external device
Press the POWER button on the remote or on the side of the TV.
If the above steps do not work, try plugging the power cord into a different outlet.
Be sure your connected devices are turned on.
Press the INPUT button on the remote and select the input to which your device is
connected (HDMI-1, AV, Component, etc).
Press the VOLUME UP button on the remote or on the side of the TV.
Press the MUTE button on the remote to ensure that mute is off.
Press MENU, then select Audio. Be sure TV Speakers is set to On.
The on-screen menu has guided setup. Press MENU, then select Help > Start Setup Wizard.
To reset the TV to factory defaults, press MENU > Help > Reset TV Settings. Select Yes.
Remember that all of your settings will be lost!