Filter
Top Products
5
26
To turn color channels off and on:
1. From the PICTURE MODE MANAGEMENT menu, use the Arrow
buttons to highlight Color Tuner, and then press OK. The
Color Tuner menu is displayed.
2. Use the Arrow buttons on the remote to highlight Red,
Green, or Blue.
3. Press the OK button to turn the color channel off or on. An X
appears over a color channel that has been turned off.
4. Use the Arrow buttons to highlight another color channel to
turn off or on. Only two color channels can be turned off at
the same time.
5. When you are finished with the color channels, press the
EXIT button.
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
Offset 0 0 0
Gain 0 0 0
To adjust the 11 Point White Balance settings:
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the 11 Point White Balance menu is displayed.
2. Use the Arrow buttons on the remote to highlight the Gain
and Color values you wish to adjust. Press the OK button
and use the Left/Right Arrow buttons to adjust the value
When you are finished press the OK button to save the
setting.
3. When you are finished, press the EXIT button.
11 Point White Balance
Gain Red Green Blue
5% 0 0 0