Vizio E SERIES Flat Panel Television User Manual


 
VIZIO 120HZ E SERIES User Manual
Version 3/17/2010 10
www.VIZIO.com
Chapter 2 Basic Controls and Connections
Front Panel
POWER ‘VIZIO’ LIGHT– The VIZIO name lights
white when powered on and it will get dimmer
when powered off.
REMOTE CONTROL SENSOR and LIGHT
SENSOR – This is the window through which all
of the remote control signals pass to the sensor.
Point the remote control directly at this window
for the best response to the remote signal.
The light sensor allows controlling the
adjustment of the backlight intensity
automatically by sensing the ambient lighting,
this is a feature selectable through the OSD menu.
Side Panel Controls
( ) – Press this button once to
power your TV on. Press the button
again to power the TV off.
MENU – This button activates the
On Screen Display (OSD). If a sub-
menu is active, pressing this button
confirms the selection to be adjusted
or takes the user to the next level of
the menu.
CH
ST Use these buttons to
step up or down the TV channels.
While the OSD is active, these
buttons function as up and down
controls in the OSD menus.
VOL
WX – Use these buttons to
increase or decrease to the speaker
volume. While the OSD is active,
these buttons function as left and right controls in the OSD menus.
INPUT (LAST) – Repeated pressing of this button steps through the input sources
in the following sequence: DTV/TV, AV, COMPONENT, HDMI1, HDMI2, HDMI3,
HDMI4, RGB and PHOTO. Once you have stepped through the entire sequence, you will return to the
beginning of the sequence.
Additionally, when the OSD is active, this button allows returning to previous menu level. When the OSD
is not active, this button will show the current input selections.
Note: When using the A/V input (usually, a composite signal) the video signal (yellow color coded cable)
need to be connected to the green jack connector. Expect to see a black/white video in the Component
input, if it is selected by accident.