Filter
Top Products
VIZIO SV320XVT/SV370XVT User Manual
Version 7/13/2009 11
www.VIZIO.com
Setting Up Your HDTV
! Read this user manual carefully before installing your HDTV.
! The power consumption of your HDTV is about 98W (AVG) for the SV320XVT; 125W (AVG) for
the SV370XVT. Use the included power cord. When an extension cord is required, use one with
the correct power rating. The cord must be grounded and the grounding feature must not be
compromised.
! Your HDTV should be installed on a flat surface to avoid tipping.
! For proper ventilation, you must allow space between the back of your HDTV and the wall.
! If you want to mount your HDTV on the wall, see below for additional information.
! Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
! Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Contact VIZIO for more information on these services at
888-VIZIOCE (888-849-4623) or www.VIZIO.com.
Wall Mounting your HDTV
Your HDTV can be mounted on the wall for viewing. If
you choose to mount your HDTV on the wall, follow
the instructions below.
1. Remove the stand base and neck:
a. Disconnect the cables from your HDTV.
b. Place your HDTV face down on a soft, flat
surface to prevent damage to the screen.
c. Remove the six screws and pull off base.
Note: To remove the base from the neck, unscrew
thumbscrew on bottom.
2. Mount your HDTV on the wall:
a. Attach your HDTV to a wall mount (sold
separately) using the mounting holes in
the back panel of your HDTV.
b. Read the instructions that came with your
specific wall mount to properly hang your
HDTV.
Note: Use M6 x 20mm 1.0 pitch screws in two upper
holes, M6 x 14mm in two lower holes.