Vizio SV420M Flat Panel Television User Manual


 
VIZIO SV420M & SV470M User Manual
40
www.VIZIO.com
DTV / TV Input Audio Adjustment
Audio Mode
When the MENU button is pressed, the On Screen Display (OSD) appears on
the PICTURE adjustment display.
Press the
button to highlight the AUDIO MODE selection.
Use the or button to choose from Flat, Rock, Pop, Classic or Jazz.
Press MENU to select Audio Mode to access the settings shown below
(Equalizer, Balance, SRS TSHD, SRS TruVolume, Digital Audio Out, Anaglog
Audio Out, Lip Sync, Reset Audio Mode).
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely.
Note: 5.1 audio surround sound is only available via the DTV/TV connection.
Equalizer
Press the button to highlight the Equalizer
selection.
Press the button to start adjusting.
A new menu will be displayed showing volumes of
different frequencies (pitches).
Starting from lowest to the highest pitch, they are
120 Hz, 500Hz, 1.5 kHz, 5 kHz and 10 kHz.
Press the
button to highlight the frequency you
wish to adjust.
Use the or button to adjust for boost or
attenuation. For example if you want to boost the
bass you would highlight 120Hz and turn it up.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD completely.
Note: The Equalizer adjustment will only be available when SRS TSHD is off.
Balance
Press the button to highlight the Balance selection.
Use the or button to adjust the left/right balance.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.