Filter
Top Products
VIZIO VM60P HDTV User Manual
Version 3/26/2007 9
www.VIZIO.com
Chapter 1 Basic Controls and Connections
1.1 Front Panel
Power ‘VIZIO’ light – The VIZIO name lights
white when powered on and orange when
powered off.
Remote Control Sensor – This is the window
through which all of the remote control signals
pass to the sensor. Point the remote control
directly at this window for the best response to
the remote signal.
1.2 Side Panel Controls
Power (
) – Switch the VM60P HDTV on by pressing the button once.
Press the button again to the VM60P HDTV off.
Menu – This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will return to the previous menu level.
Channel +/- – Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons function as up and down controls
in the OSD menus.
Volume +/- – Use these buttons to increase or decrease to the speaker
volume. While the OSD is active, these buttons function as left and right
controls in the OSD menus.
Input (Enter) – Repeated pressing of this buttons steps through the input
sources in the following sequence: TV, DTV, AV1, AV2, Component 1,
Component 2, RGB, HDMI 1, HDMI 2, HDMI 3 and HDMI 4. Once you
have stepped through the entire sequence, you will return to the
beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.