Filter
Top Products
VIZIO VW37L HDTV10A User Manual
Version 4/17/2007 8
www.VIZIO.com
Chapter 1 Basic Controls an
1.1 Front Panel
d Connections
ZIO name lights white when
emote Control Sensor – This is the window throu
Right Side Panel Controls
Power (
Power ‘VIZIO’ light – The VI
powered on and orange when powered off.
R gh which all
of the remote control signals pass to the sensor. Point the
remote control directly at this window for the best response to
the remote signal.
1.2
) – Switch the VW37L on by pressing the
button once. Press the button again to the VW37L off.
Menu – This button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will return to
the previous menu level.
Channel ▲/▼ – Use these buttons to step up or down the
TV channels. While the OSD is active, these buttons
function as up and down controls in the OSD menus.
Volume ◄/► – Use these buttons to increase or decrease
to the speaker volume. While the OSD is active, these
buttons function as left and right controls in the OSD menus.
Input (Enter) – Repeated pressing of this buttons steps
through the input sources in the following sequence: TV,
AV1 (S-Video or Video), AV2, Component 1, Component 2,
HDMI 1, HDMI 2, and RGB. Once you have stepped
through the entire sequence, you will return to the
beginning.
Additionally, when the OSD is active, this button confirms
the menu function to be adjusted. When the OSD is not
active, pressing this button will display the current input
mode.