Filter
Top Products
5
Bluetooth
To use a Bluetooth enabled cell phone with your DS6520/DS6521/DS6522, you
must rst pair and connect your Bluetooth cell phone(s) with the telephone base.
All DS6520/DS6521/DS6522 handsets can be used to make or answer calls on the
cell line.
Bluetooth wireless technology operates within a short range (a maximum of
approximately 30 feet). When you pair a Bluetooth cell phone to the telephone
base, place your Bluetooth cell phone closer to the telephone base to maintain
sufcient signal strength. For optimal performance, keep your cell phone within
15 feet of the telephone base while using the cell line.
Pair and connect your rst Bluetooth cell phone
Press and hold 1/ 2 on the telephone base for about four seconds. You
hear two beeps and the 1/ 2 light blinks.
Turn on the Bluetooth feature of your cell phone. Once your cell phone nds
your VTech phone (VTech DS6520/DS6521/DS6522), press the appropriate
key on your cell phone to continue the pairing process.
Your cell phone may prompt you to enter the PIN of the telephone base. The
default PIN of the telephone base is 0000.
Download directory
Press MENU when the phone is not in use.
Scroll to Bluetooth then press SELECT.
Scroll to Download dir then press SELECT.
Scroll to select the desired cell phone, then press SELECT.
For Android and Blackberry cell phones, you may also download
your cell phone directory to your DS6520/DS6521/DS6522
via the VTech Contact Share application. Go to
www.vtechphones.com/apps/contact_share for
application download.
Using the handset menu
Press MENU when the phone is not in use.
Press
or
until the screen displays the desired feature menu.
Press SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Telephone settings
Default settings are indicated by asterisks(*).
Settings menu Description Options
LCD language Set the screen display language. English*
Français
Español
Voicemail # Set the voicemail number for speed dial. Voicemail #
_
Clr voicemail Turn off the voicemail indicators (see the
note below).
Reset VM Icon?
Key tone Turn an audible beep on or off whenever a key
is pressed.
Key tone:On*
Key tone:Off
Home area code Enter your home area code if you dial only
seven digits for local calls.
Home area code
_ _ _
Dial mode Set the telephone to be touch-tone or
pulse dialing.
Touch-tone*
Pulse
Use the Clr voicemail feature when the telephone indicates there is new voicemail
but there is none. For example, when you have accessed your voicemail while away
from home. The Clr voicemail feature only turns off the indicators; it does not delete
your voicemail messages. As long as you have new voicemail messages, your
telephone service provider continues to send the signal that turns on the indicators.
1.
2.
•
1.
2.
3.
4.
•
1.
2.
3.
•
•
•