12
Valves are shipped in the OFF position, but you should
check to be sure. Put the knob on each valve. Check by
pushing down and turning clockwise. Figure 22.
Figure 22
For models 3200 & 3400, check that the side burner
valve is in the OFF position. Push in and turn to OFF.
Figure 23.
Figure 23
INSTALL BOTTOM RACK
Place the bottom rack between the frame supports.
Figure 21.
Figure 21
For the Platinum Series II 3400, place the bottom rack
under the cart between the frame supports. Lift up one end
of the rack so that it clears the crosspiece. Continue to lift
until the opposite end clears the opposite crosspiece. Set
the rack in place on both crosspieces.
CHECK THAT ALL
BURNER VALVES ARE OFF