Filter
Top Products
24
Volume Min
Feature will limit the lowest volume level accessible by normal users.
Power On Plug
Forces the display to a specific power state when power is restored the unit.
1. ON – Forces the display on when power is restored
2. OFF – Forces the display into standby mode when power is restored. Panel
backlight is off while the system is still ON.
Set ID
This feature will allow the installer to define a specific ID to a display so when the
installer sends commands to every display, only the display with that ID will
respond to the command. If you wish to control all units connected with serial
cables regardless of the IDs, set the ID to "0".