Westinghouse SK-26H590D TV DVD Combo User Manual


 
22
3.CHANGING CHANNELS
You can select channels using Channel Select
(0-9, • (DOT), ENT) or CH (+)/(-).
Using Channel Select (0-9, • (DOT), ENT)
When selecting the channel using Channel Select, complete input of the channel number by holding down the
button for the last digit for a moment.
•To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
1.Press the but ton.
2.Press the but ton. 3.Press the but ton.
•To select a 3-digit channel number (e.g. Channel 115):
Complete the following procedure within 4 seconds.
1.Press the button. 2.Press the but ton. 3.Press the but ton. 4.Press the but ton.
To select a digit channel number (e.g. Channel 5.1):
Complete the following procedure within 4 seconds.
1.Press the but ton. 2.
Press the but ton. 3.
Press the but ton. 4.Press the but ton.
Using LAST
Press to switch the currently tuned channel to the previously tuned channel.
Press again to switch back to the currently tuned channel.
BASIC OPERATION
ENT
ENT
ENT
05
115
5 •1
4.INPUT SELECTION
1.Press TV,DVD,PC,YPbPr,Video, HDMI on Remote Control directly.
2. a:Press Input on the remote control to display the Input
list.
b:Press / to select the desired source.
c:Press ENTER to switch the input source.
Input
Last