English
LED TV BASE
REMOVING THE LED TV BASE
If you intend to repack the LED TV unit (for shipping or storage) or you want to
change the installation to a wall mount option, you must first remove the LED TV
base.
1 Turn off the LED TV and all connected devices.
2 Disconnect the power cord from the LED TV.
3 Disconnect all signal cables from the I/O port terminals.
4 Remove the M5 x 16 screw securing the base to the desk.
5 Lay the LED TV on a clear, flat, and stable surface.
M5 x 16
6 Remove the two M4*30 screws securing the base to the LED TV.
13. Detach the base from LED TV.
13. Pack the screws you removed in step 5 together with the LED TV base for
future reassembly.
16
M4 x 30 x 2