Filter
Top Products
9
Note: The Audio-L and Audio-R (Audio L/R) inputs are shared between YPbPr, S-Video, and
Video source input connectors.
Connecting a computer to the LCD TV:
IMPORTANT: Before you begin, make sure the computer and TV are turned off.
Connect a D-Sub (VGA) or DVI cable and an audio cable to the back of the LCD TV.
D-Sub CONNECTION: Connect an analog D-Sub (VGA) cable from your computer VGA port
to the D-Sub input connection. Connect a 3.5mm stereo mini-cable from the computer’s
AUDIO OUT port to the AUDIO IN port on the LCD TV.
DVI-D CONNECTION: Connect a Digital DVI cable from your computer to the DVI-D input
connection. Connect a 3.5mm stereo mini-cable from the computer’s AUDIO OUT port to the
AUDIO IN port on the LCD TV.
After you turn on the computer, the TV will automatically adjust to the resolution of the
computer. Set the computer timing mode to 1440 x 900 at 60Hz, then turn off and reboot the
computer. Refer to your computer’s graphic card user guide for questions on how to set this
timing mode.