Filter
Top Products
2
INSTALLATION
10
English
2. Connect the 1080p Monitor to a computer
Connect a VGA or DVI cable and an audio cable to the back of the 1080p Monitor.
IMPORTANT: Before you begin, make sure all devices are turned off.
VGA CONNECTION: Connect an analog VGA cable from your computer VGA OUT
port to the 1080p Monitor VGA IN port. Connect a stereo mini cable from the
computer’s AUDIO OUT port to the VGA AUDIO IN port on the 1080p Monitor.
DVI CONNECTION: Connect a Digital DVI cable from your computer to the 1080p
Monitor DVI port. Using a 3.5mm mini cable to RCA Red/White (Left/Right) audio
converter cable, connect the 3.5mm cable plug into the computer’s AUDIO OUT port
and the RCA Red/White cable plug into the DVI AUDIO IN port on the 1080p Monitor.
3. Connect the 1080p Monitor to AV Devices
Connect one or all of the following compatible devices into the back of the 1080p
Monitor.
4. Connect power cable and power on the 1080p Monitor
Connect the power cord to the back of the 1080p Monitor then to a properly grounded
AC outlet and press the Power button to turn on the monitor.
NOTE: The monitor will take a few seconds to power up.