Filter
Top Products
WINEGARD MOBILE PRODUCTS LIMITED WARRANTY
(2 YEARS PARTS; 1 YEAR LABOR)
Winegard Company warrants this product against defects in materials or workmanship for a period of two (2) years from the date of original purchase. During
year one (1) of such warranty, Winegard Company will also pay authorized labor costs to an authorized Winegard dealer to repair or replace defective prod-
ucts. No warranty claim will be honored unless at the time the claim is made, Customer presents proof of purchase to an authorized Winegard dealer (to locate
the nearest authorized Winegard dealer, contact Winegard Company, 3000 Kirkwood Street, Burlington, Iowa 52601, Telephone 800-288-8094 or visit www.
winegard.com). Customer must provide proof of purchase with a dated sales receipt for the Winegard product to verify the product is under warranty. If the date
of purchase cannot be veried, the warranty period shall be considered to begin thirty (30) days after the date of manufacture.
If a defect in material or workmanship is discovered, Customer may take the product to an authorized Winegard dealer for service. Customer must provide
proof of purchase to verify the product is under warranty. If the product is brought to an authorized Winegard dealer for service prior to expiration of year one
(1) of the warranty period and a defect in material or workmanship is veried by Winegard Technical Services, Winegard Company will cover the Winegard
dealer’s labor charges for warranty service. The Winegard dealer must contact Winegard Technical Services in advance for pre-approval of the service. Ap-
proval of the service is at the sole discretion of Winegard Company.
Alternatively, Customer may ship the product prepaid to Winegard Technical Services (located at 3111 Kirkwood Street, Burlington, Iowa 52601, Telephone
800-788-4417). Customer must return the product along with a brief description of the problem and provide Winegard Technical Services with Customer’s
name, address, and phone number. Customer must also provide proof of purchase to verify the product is under warranty. If the product is returned before the
expiration of the warranty period, Winegard Company will (at its option) either repair or replace the product.
This Limited Warranty does not apply if the product has been damaged, deteriorates, malfunctions or fails from: improper installation, misuse, abuse, neglect,
accident, tampering, modication of the product as originally manufactured by Winegard in any manner whatsoever, removing or defacing any serial number,
usage not in accordance with product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as salt spray
and acid rain. This Limited Warranty also does not apply if the product becomes unable to perform its’ intended function in any way as a result of the television
signal provider making any changes in technology or service.
RETURN AUTHORIZATION POLICY
A Return Material Authorization (RMA) is required prior to returning any product to Winegard Company or Winegard Warranty Services under this warranty
policy. Please call our Technical Services Department at 800-788-4417 or send an e-mail to warranty@winegard.com to obtain the RMA number. Please
furnish the date of purchase when requesting an RMA number. Enclose the product in a prepaid package and write the RMA number in large, clear letters on
the outside of the package. To avoid confusion or misunderstanding, a shipment(s) without an RMA number(s) or an unauthorized return(s) will be refused and
returned to Customer freight collect.
WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PER-
SON.
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE
AND MERCHANTABILITY ARE LIMITED TO THE TWO YEAR PERIOD OF THIS WARRANTY.
In states that do not allow limitations on implied warranties, or the exclusion of limitation of incidental or consequential damages, the above limitations or
exclusions do not apply.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
This warranty gives Customer specic legal rights. Customer may also have other rights that may vary from state to state.
SATELLITE RECEIVER WARRANTY:
See manufacturer’s limited warranty policy.
TUNING ANTENNA FOR BEST SIGNAL
STEP 1. After connecting the coax cable downlead(s)
to the receiver and grounding both the antenna and
coax cable downlead(s) you are now ready to tune in
the antenna. You will want to set up a portable TV set
near your antenna to make this task easier.
STEP 2. Access the menu on your receiver that shows
signal strength, refer to receiver manual.
NOTE: Remember, the satellite signal is digital. Move
the antenna SLOWLY when tuning. This allows the
receiver to catch up with the signal.
STEP 3. Using a compass, point antenna in direction
indicated by the receiver for your location.
STEP 4. Slowly rotate the antenna in 3
0
increments
left/right until the signal meter is peaked. Tighten the
elevation clamp bolts. See Figure 6.
STEP 5. Loosen the elevation bolts and slowly raise/
lower antenna in 3
0
increments until the signal meter is
peaked. Tighten the elevation bolts. See Figure 6.
STEP 6. Press clear/quit key until you have a picture. If
you do not have a picture you are on the wrong satellite.
Double check your elevation and direction and repeat
Step 8 on page 3 and Steps 2 through 6 on this page.
STEP 7. Double check ALL nuts/bolts for tightness.
Check that coax cable(s) are secure. Check that ground
wire is connected to ground rod and secure.
NOTE: To connect your receiver to a phone, refer
to receiver manual.
Printed in U.S.A. Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 319/754-0600 FAX 319/754-0787 Rev2, 2/12
FIGURE 7
STEP 10. Attach coax downlead(s) to ground block as
shown in Figure 7 (dual ground block shown).
STEP 11. Attach receiver coax cable to ground block
and route to receiver. Be sure to seal coax cable entry
into house with an appropriate sealant.
STEP 12. Connect coax cable(s) to receiver. Refer to
receiver manual.
To Receiver
To Antenna
Drip Loop
Ground Wire to
Ground Rod
Cable
Clips
Ground
Block
WS-MOBWARREV2
Rev. 1/10
Winegard is a registered trademark of Winegard Company. DIRECTV is a registered trademark of DIRECTV, Inc., a unit of Hughes Electronic Corp. DISH is a
registered trademark of DISH Network L.L.C. Bell TV is a registered trademark of Bell Canada, Inc.