Winegard FVHD45C TV Antenna User Manual


 
Assembling the Antenna
Start by unfolding the VHF elements on the back assembly until the
elements are perpendicular to the boom (Figure 1). You should hear
the elements click into place.
Boom
VHF Elements
Figure 1
Unfold the six UHF elements on the front assembly until they are
perpendicular to the boom. See Figure 2. You should hear the pieces
click into place. Pull the two phasing lines away from the boom.
Before
After
Boom
Figure 2
Boom Boom
Phasing
Lines
Fold out Elements
Figure 3
Open End
of Boom
On the back assembly, remove the nut and screw from the plastic block
nearest to the open end of the boom and to the mast clamp (Figure 3).
Screw
Removal
Site
Before After
4
Unfolded
Elements