Filter
Top Products
Turn on the receiver using the ON /OFF switch on the back panel of your receiver.
Then, press the standby button on the front panel. The startup on-screen display
(OSD) will be shown on the TV screen. The startup OSD will remain for several
seconds and then disappear.
STEP4: Search for programs
1. The STB needs to perform a scan to determine where the channels are.
Press Menu to display the Main Menu. Use
keys to select Installation and
press OK, select the Installation menu. The unit has two methods to search for
programs: Auto Search and Manual Search.
To start with, we’ll use Auto Search. Move cursor to Auto Search and press OK,
the system will search for programs automatically. This should take a few minutes.
After searching, found programs will be added to the TV program list. If you know
the frequencies of certain channels, you can add them manually. For more details,
please refer to 1. Installation in Section III.
STEP5: Select program
Press OK to call up a program list. Use
to select the desired program and
press OK key to view in full-screen.
11