Filter
Top Products
1.2 Manual Search
You can set parameters in Manual Search window if you are familiar with station
frequencies. In this mode, channels can be tuned in by hand.
Channel No.: Press
to select the channel number you wish to edit
Frequency: This value will vary according to channel, however, to adjust, use the
number keys to enter in a different frequency.
Bandwidth: Press
to choose 6M, 7M or 8M. (7M is standard)
At the bottom of this window, there are two dynamic colour bars reflecting the
signal’s quality and strength.
Press OK key to start searching. Upon a successful search, the unit will store
the newly found station as a program. During this process, you can press EXIT
to finish.
Note: this function is for advanced users.
1.3 Channel Edit
Select Channel Edit item in the Installation menu and press OK. The Channel
Edit window will be displayed. From here, new channels can be added and the
existing ones can be edited or deleted.
You can use the color keys on the REMOTE to execute the corresponding
commands displayed at the bottom of the screen:
Add (Red key) Delete (Green key)
Modify (Yellow key)
Add
The Add Channel window allows you to enter necessary parameters for a new
channel.
Frequency: You can input values referring to above.
Bandwidth: Press
keys to choice 6M, 7M or 8M.
Transmission Mode: You have a choice of 2K, 8K and Auto. Press
to
select appropriate mode.
Guard Interval: Available options are: 1/4, 1/8, 1/16, 1/32 and Auto. Press
13