Filter
Top Products
8 Installation
MAN0549 (6/30/2006)
Attach Backhoe to Tractor (Continued)
5. Place tractor 3-point lower lift arms between right
and left mounting brackets on the backhoe.
Secure into position using hitch pins (14), sleeves
(13) if needed, and klik pin (17).
6. Connect double top link bar to the tractor top link
bracket. Use top link pin supplied with your tractor
and sleeve (9). If necessary, separate and adjust
top link bars IN or OUT to maintain the backhoe
vertical position. See “Tractor Connections” on
page 11 for tractor top link specifications.
NOTE: Sleeve (9) is for tractors with a 1-inch top
link pin.
7. Torque all hardware to specifications listed in the
9. 30067 Sleeve, .765 x 1.0 x 1.69
13. 34291 Sleeve, 5/32 x 1-7/16 x 1-7/8
14. 37487 Pin, hitch .88 x 3.0
17. 62043 Klik pin, 1/4 x 1-3/4
Figure 6. Tractor 3-Point Arm Installed