Filter
Top Products
Installation
Xerox LS 3270
- 11 -
using the rotary switch (see section 1.1.1, PCL or FSL
output Driver for details).
2.2.3 Automatic Power Supply Control
The Xerox LS 3270 will perform a power supply control to see if
there is sufficient power on the unit.
Section 2.2.1, “Pre-Installation Information” describes how to
recognize whether a 5V external power supply is needed in order
to make the Xerox LS 3270 work.
The 5V power supply can be ordered, using the below order
numbers:
Order no. 999 021 130 for EU
Order no. 999 021 230 for UK
Order no. 999 021 330 for US
The transformer is connected to the plug on the box's side panel
as indicated in Fig. 2-3 in the following.
External Power Supply
Connector
TEST
B
A
T
Fig. 2-3 The Xerox LS 3270 and its side panel