Filter
Top Products
21
English
Setup Menu
Program: Disc
You can play the disc in the order you
want by programming the discs to be
played. Up to 5 discs can be stored.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {PROGRAM}, then press 2 to
select {FDS}.
2 Press ENTER/OK to confirm.
To input your favorite discs
3 Use the numeric keypad (0-9) to enter
a valid disc number.
4 Use 1 234 to move the cursor to the
next position.
5 Repeat steps 3–4
to input another disc
number.
If you want to remove a disc
6 Use 1 234 to move the cursor to the
disc you want to remove.
7 Use the numeric keypad (0-9), press 0
to remove this disc from the program
menu.
To start program playback
• Use 1 234 to highlight {START} on
the program menu, then press ENTER/
OK.
➜Playback will start with the selected
tracks or discs under the programmed
sequence.
To exit program playback
• Use 1 234 to highlight {EXIT} on the
program menu, then press ENTER/
OK.
OSD Language
This menu contains various language
options for display language on the screen.
For details, see page 9.
Screen Saver
This function is used to turn the screen
saver on or off.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {SCREEN SAVER}, then press 2.
ON
Select this if you wish to turn off the TV
screen when disc playback is stopped or
paused for more than 15 minutes.
OFF
Select this to disable the screen saver
function.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
Sleep Timer
This feature automatically sets the DVD
player in standby mode after the amount of
time you have set.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {SLEEP}, then press 2.
2 Press 34 to select a setting.
➜You can select from 15, 30, 45 and 60
minutes. Select {OFF} to cancel the
sleep timer function.
3 Press ENTER/OK to confirm your
selection.
(1) Disc : _
(2) Disc : _
(3) Disc : _
(4) Disc : _
(5) Disc : _
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.