Yamaha DV-C6860 DVD Player User Manual


 
33 En
English
Troubleshooting
No audio at digital output Check the digital connections.
If you are playing a DTS source, check that your receiver can
decode DTS and “DIGITAL OUTPUT” is set to “ALL” (see
page 23).
If you are playing an MPEG-2 source, check that your
receiver can decode MPEG-2. Otherwise, make sure
“DIGITAL OUTPUT” is set to “PCM ONLY” (see page 23).
Check if the audio format of the selected audio language
matches your receiver capabilities.
Disc does not play The DVD+R/RW, DVD-R/RW, CD-R/RW must be
finalized.
Ensure the disc label is facing up.
Check if the disc is defective by trying another disc.
If you have recorded a picture CD or MP3 CD yourself,
ensure that your disc contains at least 10 pictures or 5 MP3
tracks.
Region code is incorrect (see “Region codes” on page 2).
Picture freezes momentarily
during playback
Check the disc for fingerprints/scratches and clean it with a
soft cloth wiping from center to edge.
This unit does not respond to
the remote control
Aim the remote control directly at the remote control
sensor on the front panel of this unit.
Reduce the distance of the remote control from this unit.
Replace the batteries in the remote control.
Reinsert the batteries with their polarities (+/ signs) as
indicated.
Buttons do not work To completely reset this unit, unplug the AC cord from the
AC outlet for 5-10 seconds.
This unit does not respond to
some operating commands
during playback
Operations may not be permitted by the disc. Refer to the
instructions of the disc jacket.
This unit cannot read CDs/
DVDs
Use a commonly available CD/DVD lens cleaner to clean
the lens before sending this unit for repair.
Menu items cannot be selected Press STOP (9) twice on the remote control before
selecting Setup Menu.
Depending on the disc availability, some menu items cannot
be selected.
Unable to turn on or off a
progressive scan
Check that the video signal output is switch to “YUV” (see
“Switching the YUV/RGB” on page 27).
Problem Solution