Filter
Top Products
29
English
CHANGING THE DVD MODE SETTINGS
DETAILED SETTINGS
Set the parameters for 6CH DISCRETE output to suit the
speaker system.
If you select “Multi-channel” from the Setup menu, set
parameters a
, b
, and c
(page 29 and page 30) according
to the speaker system.
Setting panel
aa
aa
Speaker selection and size
1
Press the cursor buttons (
kk
kk
,
nn
nn
,
ll
ll
,
hh
hh
) to
select a speaker, then press ENTER.
The indicator is displayed above and below the
speaker icons.
2
Press the cursor buttons (
kk
kk
,
nn
nn
) to select a
setting, then press ENTER.
• Speaker size options:
L: Large, Small
R: Large, Small
C: Large, Small, None
SW: Used, Not used
LS: Large, Small, None
RS: Large, Small, None
The left (L or LS) speaker size is automatically
assigned to the right (R or RS) speaker. (For example,
if you select Large for the L speaker, the R speaker
will automatically be set to Large.)
• Example: Left rear speaker
1
No icon appears when the speaker is not used.
2
This icon appears when using a large speaker
capable of low-frequency (under 100 Hz) output.
3
This icon appears when using a small speaker that
is not capable of low-frequency output.
•Factory default speaker-size settings:
L/R: Large
C/LS/RS: Large
SW: Used
Speaker settings
DVD-A DVD-V
, , ,
/ ENTER
SETUP
SELECT
ENTER RETURN
ms
ms
dB
0
dBdB
L
Exit
Test
LS
R
SW
C
RS
dB
0
0
0
0
0
Main (L)
Rear
(L) a
Subwoofer
(L) c b (R) c (R) a
Exit
Test signal
Center Main (R)
aab a c
c a
LS
LS
123
DVD-S2300_UA.book Page 29 Thursday, October 3, 2002 11:03AM