Yamaha DVD-S30 DVD Player User Manual


 
6
PREPARATION
This section explains how to connect the DVD-S30 to your TV or external AV amplifier (AVC-S30 etc.). For connections
related to external AV amplifier, refer to the manual for it.
Connect the power cord of the DVD player or external components after connection of all cables are complete.
Other video connections
(to enjoy high quality pictures)
To make component video connection instead of video
connection using the supplied video pin cable, connect
COMPONENT (Y, P
B, PR) jacks of the DVD-S30 and
component video input jacks of the TV using a commercially
available component video cable.
To make SCART connection (U.K model only) instead of video
connection using the supplied video pin cable, connect SCART
jack of the DVD-S30 and SCART input jack of the TV using a
commercially available SCART cable.
y
COMPONENT jacks can output a progressive scan signal. To
enjoy high quality DVD video with progressive scan mode, set
“PROGRESSIVE” in the Setup menu to “ON” (page 23).
Other audio connection
To make analog audio connection instead of digital
connection using the optical cable, connect AUDIO OUT
(L, R) jacks of the DVD-S30 and audio input jacks of the
AV amplifier using a commercially available audio pin
cable.
Connections
Note
VIDEO OUT
AUDIO OUT
DIGITAL
OUT
MAINS
OPTICAL
PCM/
q DIGITAL
/MPEG
VIDEO
Y
P
R
PB
R
L
COMPONENT
STANDBY/ON
MOVIE
NIGHT
MUSIC
MOVIEAUTOMAIN/SUBAACDTS DVS
MUSIC
SPORTS
GAME
MODE
INPUT
4321
VOLUME
qDigital
12345
0+2+4+6+8-8 -6 -4 -2
6789
SILENT CINEMA
qPro Logic II
OPTICAL DIGITAL
INPUT
VIDEO
INPUT
Optical cable (supplied)
TV (monitor)
Video pin cable
(supplied)
AV amplifier
(AVC-S30 etc.)
to AC outlet
SCART (U.K.
model only)