Filter
Top Products
Initial Settings menu
07
30
En
English
Chapter 7
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select ‘Initial
Settings’.
2 Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.
Note
• In the table below, the default setting is
shown in bold: other settings are shown in
italics.
• The Digital Audio Out settings only need to
be set if you have connected the digital
output of this player to an AV receiver, or
other equipment.
• Check the owner’s manual supplied with
your other equipment to see which digital
audio formats it’s compatible with.
• Some settings, such as TV Screen, Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
Digital Audio Out settings
Initial Settings
Setting Option What it means
Digital Out On
Digital audio is output from the digital outputs.
Off
No digital audio output.
Dolby Digital Out Dolby Digital
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital > PCM
Dolby Digital audio is converted to PCM audio before being
output.
DTS Out DTS
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible
with DTS audio.)
Off
No digital audio is output when playing a DTS disc.
96 kHz PCM Out 96kHz > 48kHz
96kHz digital audio is converted to 48kHz for digital output.
96kHz
96kHz digital audio is output as is at 96kHz.
01_DVD-S559_En.book Page 30 Friday, November 18, 2005 4:32 PM