Yamaha RX-V420RDS TV Cables User Manual


 
40
DELAY TIME AND SPEAKER OUTPUT LEVELS
When using the digital sound field processor with the
Dolby Pro Logic decoder, Dolby Digital decoder or DTS
decoder, you can adjust the delay time between the main
sound and sound effect, and each speakers output level as
you wish.
Delay Time
You can adjust the time difference between the beginning
of the sound from the main speakers and the beginning of
the sound effect from the rear speakers. The larger the
value, the later the sound effect is generated. The delay
time can be individually adjusted to all DSP programs.
Notes
Adding too much delay will cause an unnatural effect with some
sources.
The sound is momentarily interrupted while adjusting the delay
time.
Program Preset value (ms)
1. CONCERT HALL 45
2. JAZZ CLUB 30
3. ROCK CONCERT 15
4. DISCO 26
5CH STEREO 2
GAME 36
5. TV SPORTS 10
6. MONO MOVIE 69
7. 70 mm SPECTACLE 23
DGTL SPECTACLE 13
DTS SPECTACLE 13
70 mm SCI-FI 20
DGTL SCI-FI 16
DTS SCI-FI 16
8. 70 mm ADVENTURE 20
DGTL ADVENTURE 15
DTS ADVENTURE 15
70 mm GENERAL 20
DGTL GENERAL 15
DTS GENERAL 15
9. PRO LOGIC/NORMAL 20
DOLBY DIGITAL/NORMAL 5
DTS DIGITAL SUR./NORMAL 5
PRO LOGIC/ENHANCED 20
DOLBY DIGITAL/ENHANCED 5
DTS DIGITAL SUR./ENHANCED 5
Sound Output Level of the Center,
Right Rear and Left Rear Speakers,
and Subwoofer
If desired, you can adjust the sound output level of each
speaker even if it has already been adjusted in
ADJUSTING THE SPEAKER BALANCE procedure.
Notes
If CENTER SP in the SET MENU is set to the NON position,
the sound output level of the center speaker cannot be adjusted.
This is because the center channel sound is automatically output
from the right and left main speakers.
Once the sound output level has been adjusted, the level will be
the same for all DSP programs.
Speaker Preset value (dB)
Center 0
Right rear 0
Left rear 0
Subwoofer 0
0107V420RDS35-42_EN 2/12/1, 1:36 PM40