Filter
Top Products
14
General notes
- Depending on the equipment you wish to connect, there are various ways
you could connect the player. Possible connections are shown in the
following drawings.
- Please refer to the manuals of other equipment as necessary to make the
best connections.
- Do not connect your DVD-player via your VCR. The video quality could be
distorted by the copy protection system.
Digital Connections
Your DVD-Player has COAXIAL and OPTICAL digital out jacks. Connect
one or both of them to your AV receiver equipped with Dolby digital, DTS,
or MPEG decoder using each specific cable (separate purchase).
You will need to activate the player’s digital output (see ‘Personal
Preferences’).
Note: If the audio format of the digital output does not match the capabilities of
your receiver, the receiver will produce a strong, distorted sound or no sound at all.
Make sure to select the appropriate audio format at menu screen included on the
disc. Pressing AUDIO once or more may change not only audio languages but also
audio formats, and the selected format appears for several seconds on the status
window.
When connecting the optical fiber cable
● Remove the cover when using the OPTICAL jack. Keep the cover and
attach it when the jack is not being used to protect it from dust.
● Bend an optical cable as little as possible.
● Use commercially available optical fiber cable that conforms to EIA
standards. Other cables may not function correctly.
Preparation
PREPARATION
DIGITAL OUT
COAXIAL
PCM DIGITAL
MPEG DTS
OPTICAL
AV receiver
Left main
speaker
Left rear
speaker
Center speaker
Right main
speaker
Subwoofer
Right rear
speaker
COAXIAL
IN
OPTICAL
IN
O
C
All
Karaoke vocal