Filter
Top Products
12
Configuration (SETUP)
Once you have connected your DVD-Player you may now switch it on. If the video
connection is correct you will see the
Yamakawa startup picture.
Before you insert a DVD-movie or any
other disc into the player you should
complete the setup settings which are
described on the following pages.
The basic settings of the DVD-Player are done in the SETUP. If you
press the SETUP key you will see the main menu of the DVD-Player.
Normally these settings only have to be made once before the first time
you use the player in order to match
your player to the TV set and the audio
equipment. Later on during using your
player changes in the SETUP are rather
unlikely. To change in between the items
AUDIO, VIDEO and OTHER, where
various settings can be made use the
cursor keys.
When starting the SETUP you already
are in the AUDIO menu. If you press SETUP again you will save you setting a
leave the SETUP again.
AUDIO
In the AUDIO menu you may select two items with the cursor keys:
• „OUTPUT“ (Audio output)
• „DRC” (Dynamic Range Control)